TerraStone - SMOOTH - 1 Gallon (Lugarti)

THE ULTIMATE DRYLOK® ALTERNATIVE

Lugarti® TerraStone™ is a rigid hardcoat engineered to replicate natural rock surfaces. It cures to a durable, stone-like finish ideal for building cliffs, ledges, rock walls, and other structural features in naturalistic habitats.

Built for durability, it forms an inert surface that is safe for reptiles, amphibians, invertebrates, microfauna, and plant life alike. Its neutral base provides full color control when tinted with Lugarti® TerraTint™ prior to application and remains fully paintable after curing, allowing precise control over color, depth, and natural environmental realism.

• DURABLE

• WATERPROOF

• ANIMAL-SAFE

• NO HARSH FUMES

USAGE INSTRUCTIONS:

Prepare - Carve or shape structural elements. Remove all dust and debris. Surfaces must be clean and dry.

Mix - Stir thoroughly before use. Do not dilute. Add Lugarti® TerraTint™ to achieve desired color.

Apply - Brush, stipple, or trowel in even coats, working the coating into carved surfaces to ensure full coverage and strong adhesion.

Dry - Allow 60–90 minutes between coats. Two coats provide optimal durability and surface uniformity.*

Cure - Allow a minimum of 24 hours before introducing animals, plants, or moisture. 48–72 hours recommended for full cure and maximum durability.*

Finish - Once fully cured, Lugarti® TerraPaint™ can be applied to enhance naturalistic surface detail.

Storage - Keep container sealed when not in use. Store at room temperature. Do not freeze.

*Dry and cure times are based on typical indoor conditions (70°F / 21°C, moderate humidity). Environmental conditions, including temperature and humidity, may affect drying and curing times.

MADE IN USA

DRYLOK® is a registered trademark of its respective owner. Lugarti is not affiliated with or endorsed by the trademark owner.